There is almost no differences between INPA Ediabas 5.0.2 and INPA 5.0.6.Update and script files are the one that matters. The biggest difference is that INPA 5.0.6 is less translated from the German language. There is no English version of5.0.6, 70% is in German. INPA 5.0.6 supports F series, m54 and n54 engine. Free download INPA Ediabas 5.0.2.
NCS/INPA Download: Access to the direct download of NCS-Expert, INPA 6.4.3, INPA 5.02 and bonus coding files can be found here. Full.PDF Installation Walkthrough Guide We have created a very detailed walkthrough guide on how to install, configure and get NCS-Expert running can be found here (Windows 7) and here (Windows 10).

This is a great write-up of INPA BMW software and hardware (K+DCAN interface), incl.: Part 1: INPA software – inpa bmw definition – inpa 5.0.2 & 5.0.6 download – inpa software install (windows XP/7/8/10) – inpa driver software installation – inpa bmw how to use. Part 2: INPA cable – inpa k+dcan cable website. Jan 18, 2017 BMW INPA Ediabas 5.0.2 download, inpa 5.06 download, inpa 6.4.7 download hereand install it on Windows XP/ Vista or Windows 7/ 8/ 10 (32bit. Apr 02, 2016 BMW INPA 6.4.3 & 5.0.6 & 5.0.2 Free Download Posted on April 2, 2016 by sales Several versions of BMW INPA diagnostic software are available on the aftermarket.

It’s a full BMW INPA software for F and E series models. Wish this helps.

Free download

BMW Standard Tools and INPA 5.0.6

https://mega.nz/#F!atxDATqT!r6SO9Wu75GuDJmpbTTO48Q (It is share by forum member,can not promise 100% work on your laptop and unknown security)

INPA 5.0.2 software

http://www.uobdii.com/wholesale/bmw-inpa-k-can-with-ft232rq-chip.html(Here it’s INPA software with K+CAN,it tested by our engineer,can 100% work.)

BMW Standard Tools 2.12 – Install First

Includes (EDIABAS v.7.30, Tool32 v.4.03, INPA v.5.06, WinKFP v.5.31 & NCS Expert v.4.01).

INPA_Fxx_v.2 – Install Second

Copy INPA_Fxx_v.2 folder to C:EC-AppsINPA_Fxx_v.2 and EDIABAS to C:EDIABAS overriding existing EDIABAS Folder.
Run INPALOAD.exe from INPA_Fxx_v.2 BIN folder (C:EC-AppsINPA_Fxx_v.2BININPALOAD.exe).
Note: DISABLE WINDOWS FIREWALL ANY ANY VIRUS SOFTWARE.
Note: For Exx connection, you will need to change EDIABAS.ini file to “INTERFACE = STD:OBD” and edit OBD.ini Com Port settings accordingly to match you PC’s Com Port settings.

And here are some related contents about BMW INPA:

BMW INPA Installation Guide:

BMW INPA Window XP Installation Guide

Prepare:

Before installing, delete all version of INPA-ADS from your computer.

For example: rename INPA into “_INPA”, EDIABAS into “_EDIABAS” etc.

Insert CD to disk E: and open it, there will be a file named “INPACANinstall” which will guide you how to install in detail.

Step1: Open “01_Step1” file in the root of CD disk and copy folder “EC-APPS” onto disk C:

Step2: Run the file “01_Step1NFSEntpacktdisk1SETUP.EXE”

Choose “Windows XP” and click next

Choose “User Mode” and click next

Choose 1 Parametrieren einer neuen Konfiguration ohne Daten

->OBD

-> “Kein API-TRACE”

-> “Kein IFH-TRACE”

-> “Komfort(.IPO)” and click next

Then press any key to continue

Inpa Download For Windows Xp

This step Complete

! RE-BOOT YOUR COMPUTER

Step3: Run the file “02_Setup2INSTALLInstprog.exe”

-Choose English, press continue

-While choosing the HDD disk C: for initial setup, do not change, the installation must be on drive C: only, press continue

-Choose configuration “BMW Group Rectification Programs UK” and press continue

-Activate all spare boxes with:

EDIABAS 6.4.3 – UPDATE

INPA 5.0.1- UPDATE

NCS Expert 3.0.8 – Complete

-Press continue to start installation and press End to exit the installation

Step4: Run the file “03_Setup3INSTALLInstprog.exe”

-Choose English, press continue, press continue again

-While choosing the HDD disk C: for initial setup, do not change, the installation must be on drive C: only, press continue

-Choose configuration “BMW Group Rectification Programs UK” and press continue

-Activate all spare boxes with:

INPA 5.0.1- UPDATE

NCS Expert 3.0.8 – UPDATE

-Press continue to start installation and press End to exit the installation

Step5:

Find the file C:EC-APPSINPACFGDAT named “inpa.ini” and replace it with the file “inpa.ini” that is in the root directory of CD disk

Step6: Plug the adapter into spare USB-Port and install drivers manually

Copy the “Driver_D_CAN_USB” file onto disk C:

Inpa 5.0.6 Download

Choose install from a list of specific location

Select the folder “Driver_D_CAN_USB”

You may install the same driver again

Complete driver installation

Then Change the number of COM-port to the value from 2 to 4, also change the value of Latency Timer from 16 to 1.

Step7: open disk C:EDIABASBINEdiabas.ini

In the file “EDIABAS.ini”

“Interface = STD:OBD” must be choosen

Step8: in the file C:WindowsOBD.INI, put the number of USB-COM-port to the value that you remember in step 3….

For the detail information please check this article:Install BMW INPA software on Win XP

BMW INPA Window 7/8 Installation Guide:

STEP 1: INSTALLING BMW STANDARD TOOLS

Download and install BST 212

Since BST (BMW Standard Tools) was designed for Win XP 32bit operating Systems, users have faced issues with tools like WinKFP and NCSExpert since Win 7 64bit systems have been introduced. Running in XP compatibility mode just wasn’t enough. Presenting you with several errors or not running at all. Only solution was to install on a XP system or like me… XP VMware. Well that all changed with BST 2.12 which works on 32 or 64bit systems.

WIN 7/8, 32/64bit OS

STEP 2: INSTALLING INPA software

(will need it after coding certain modules such as DME for CAS or EWS Alignment)

Download and install my version of INPA 5.06 with Fxx Support by simply

replacing the existing folders with the folders provided in the

Replace C:EC-AppsINPA

Replace C:EDIABAS

STEP 3: INSTALLING NCSEXPERT IN ENGLISH

Download and install NCSEXPER32_ENG.zip

Copy and replace contents in the .zip file with contents in C:NCSEXPERBIN. Now NSCExpert is in English but you will find the Hot Keys do not work. This is a bug a fellow MHH member discovered and haven’t really worked on trying to fix it so for the time being just click on the F# key with your mouse.Not done yet with NCSExpert. Need to import profiles to NCSExpert. How? well download the PFL.zip and copy and replace all contents from PFL.zip to [b]C:NCSExpertPFL. (you will also find a lot more PFL’s by searching for NCSExpert profiles in Google)

Now you have a working WinKFP and NCSExpert with profiles loaded on your PC we can continue to Step 4.

STEP 4: INSTALLING & CONFIGURATING DCAN INPA CABLE

Configure your DCAN/INPA cable. If you followed my steps correctly than your EDIABAS should already be configured to STD:OBD for use with the INPA cable. If not you can download ediabas-konfigurator from here if it is not already in your C:EDIABASEdiabas-Konfigurator folder. This tool allows you to easily change the ediabas.ini to your desired interface. So if you are switching from INPA to E-Sys you could use this to switch from STD:OBD to ENET.

Now to set your COM Port we must first find which COM port is being used for your cable.

Connect your cable to your PC (some may require a 12v supply to power the cable) Allow the device drivers to install (for best driver use the driver that came with your cable. If not then let win